Maintenance-free angular contact spherical plain bearing GAC 110 SK

1.ISO9001,ISO/TS16949 certificated 2.blacked bearing steel GCR15 3. radial or axial trust type, 4.ES,DS,2RS,C3,K1 available

Angular contact spherical plain bearings have sphered sliding surfaces on the inner and in the outer ring which are arranged at an angle to the bearing axis. They are therefore particularly suitable for carrying combined (radial and axial) loads. A single angular contact spherical plain bearing can only accept axial loads acting in one direction. Under radial loads, a force acting in the axial direction is produced in the bearing which must always be opposed by an equal force acting in the opposite direction. Therefore, the bearings are usually adjusted against a second bearing. If two angular contact spherical plain bearings are arranged so that their sphere centres coincide, a spherical plain bearing is obtained which can accommodate heavy radial loads as well as heavy axial loads in both directions.

TTO angular contact spherical plain bearings are produced as standard with the sliding contact surface combination steel/PTFE composite. They are primarily intended for loads of constant direction and are maintenance-free. However, to enhance protection against corrosion and to improve sealing, it is recommended in many applications, that the space surrounding the bearing be filled with a rust inhibiting lithium base grease of consistency 2 or 3 during mounting. Such an initial lubrication also extends the effective service life of the bearing.

Maintenance-free angular contact spherical plain bearing GAC 110 SK